Automation of Condenser and Radiator Tube Stacking

Automation of Condenser and Radiator Tube Stacking Introduction: CE 3.1: This career episode will focus on my final project carried out to satisfy the credentials required to complete my undergraduate degree. I was able to understand the process of automation cleaning process rather than the standard manual process. I understood the use of CATIA software in designing and developing the models for the project. I was able to enhance my communication and written skills. Background:Â   CE 3.2: Visteon Automotive India Private Ltd mainly concentrates on the quality of their product. The problem criteria related with the post tube milling process that is the condenser and radiator tube cleaning. The present cleaning method is done manually. Limitations of the present method are that the tubes are produces at high speeds (for example 240 tubes/ min). It is not possible to control the rate of production of the tubes, so it requires more manpower for the cleaning process. It leads to many disadvantages such as erosion in tubes, stacking of tubes is difficult, more manpower is required, remains of burrs and coolant, more time is required for the entire process. CE 3.3: This project is aimed to design an automation process for this ongoing issue. A few concepts were modelled in CATIA. Only one concept was accepted by Visteon for which complete modelling, drafting and costing was done. Since the concept meets the requirements it would benefit Visteon in terms of automation, less manpower, customer satisfaction, work accuracy and cost effective process. CE 3.4: The following activities were essential to successful competition of the project: Completion of the project within the timeframe given by the professor. Have brain storming sessions with project supervisor on how to carry out the work. I read books and conducted a literature review on material properties and selection. Discuss with lab technicians on the parts required for designing the automation process. Carry out the necessary designs using CATIA software Calculate the material cost along with its dimensions. The project documentation was completed which presented my finding and the results to the project supervisor and the faculty. CE 3.5: The hierarchy of the project is shown below: Personal Engineering Activity: CE 3.6: As part of the final project we were formed in groups of three. I along with my team members were assigned to a project supervisor. After a few brainstorming sessions, our supervisor suggested to visit Visteon Automotive and find out a problem criteria. After careful observation and planning myself and my team members decided to develop an automatic tube stacking and cleaning process for the condenser and radiator. This project helped in reducing the overall costs, labour required and better cleaning quality. CE 3.7: This was a challenging project; the first step was to understand the procedure carried out my manual cleaning. I conducted a literature review on the manual process and its advantages and disadvantages along with the material properties and selection. The project supervisor helped in understanding the major requirements: Automated stacking of tubes Automated loading of tubes in trays/bins Automated cleaning process either through blowing process or suction I suggested the project guide that we use CATIA software as it has better 3D visualization for which the project guide agreed and asked to carry out the design of the automation process. CE 3.8: Myself and my team members carried out different designs which would help in the automation process. I have encountered a few limitations in our designs and approached the supervisor with the findings. The supervisor was impressed with the findings and suggested to talk to one of the employee of Visteon Automotive to help us with the problem. The main limitations encountered while designing are as follows: Tubes with different dimensions cannot be arranged. Since the tubes are produced at 240 pieces/min (average) it is very difficult to arrange in a single plane. Slip of tubes may occur frequently. Cleaning is not done completely. Frequent monitoring is required. Thereby increasing the labour cost. CE 3.9: After careful planning and taking into consideration the key points myself and my team members were able to produce a design for the automation process and has fulfilled the major requirements. The process begins as the tubes from hopper are collected Tubes get collected in stacker 1 which are balanced by and remains there until a certain amount is filled (approx. 100 tubes). As the amount is achieved, plate A opens and the tubes get into stacker 2. As soon as the certain amount reaches stacker 2, the plate A again closes to hold the remaining tubes. The movable walls lock the tubes in stacker 2 and with the help of a linear rotary clamp cylinder (900 cylinders), the stacker bends down to the bin position. The movable walls retract, then arm A comes in contact, takes the bin to the cleaning area, cleaning process takes place and the same arm drops the bin in the unloading area. Finally, the product is unloaded manually. CE 3.10: Once the design was approved the next step was to fabricate the parts required for the model. I took the initiative to list all the parts required for the model. After which our supervisor suggested the materials required for the parts. I also carried out the material cost for parts requiring fabrication. The costs for other parts were calculated and the entire estimate was made. The Bill of Materials includes the details about the material used; density of the respective material used, dimensions such as length, breadth, thickness, diameter, mass, and volume are indicated. CE 3.11: The following are the key aspects from my analysis: The problems in manual cleaning of condenser and radiator tubes are erosion in tubes; stacking of tubes is difficult; more manpower is required; remains of burrs and coolant; more time is required for the entire process. Suction unit was provided with an adjustable linear guide so that the unit can be adjusted according to the tube dimensions. Cylinder mechanism was provided to transfer tubes from stacker 1 and 2 in order to reduce tube damage. L clamp structures were provided for cylinders as holding devices to reduce space. The final concept meets all the requirements such as automated stacking; automated loading of tubes in bins and automated cleaning. It would benefit them in terms of automation, less manpower, customer satisfaction and work accuracy. Summary: CE 3.12: The project was completed within the timeframe given due to proper planning and has met the requirements. I had discussions with lab assistants to understand different tools of the CATIA software. I strengthened my communication and written skills along with analytical ability by working on the design of the automatic tube stacking and cleaning process. The results of the projects were documented and submitted to the project guide.

Classroom Problems Essay

1.Classroom Shortage Teachers have to shout so loud because 70 – 100 students were jam packed sharing one classroom. Many classrooms have been divided into two by partitions. Stairwells and corridors have been converted into miniature classrooms. There were morning and afternoon sessions (2 shifts) to accommodate all students. 2.Bullying inside the classroom Disunity and bullying greatly affects a student behavior and performance inside the classroom. Bullying is very damaging to a student. It might affect his/her self-confidence and might induce the student to go into a shell and thus makes his world gloomier. 3.Classroom Behavior One of the biggest problems that are usually encountered by the teachers are their student’s behavior. It can cause disrupt for other students in the class. Other issues are students who don’t want to participate for various reasons. Also students being unprepared for school, not having the resources, or having homework done, because of various reasons (home life, parent problems, etc). 4.Lack of parental cooperation Many parents lack guidance to their kids. It is a great help to a student success if parents were able to guide their siblings well. There were times that parents start attacking their student’s teacher when they hear complain from their kid against teacher. Parents like to defend their child without knowing their child’s behavior and problems. 5.Lack of technology inside the classroom (in schools) Computers as part of technology are now essential to classroom learning. Many schools are still not able to introduce even the basics of computer literacy to their students because they are still behind civilization.

The Role Of Community On Natural Resources Conservation Essay

AGRAWAL, A. AND C. GIBSON. 1999. Enchantment and Disenchantment: The role of community in natural resources conservation. World Development 27(4): 629- 649. Bose up, E 1965. The condition of Agricultural Growth. Allen and Unwind, London. Cheng S, Hiwatashi Y, Imai H, Naito M, Numata T (1998). Cleaver KM, Schreiber GA (1994). Reversing the spiral: The population, agriculture, and environment nexus in Sub-Saharan Africa. The World Bank. Washington DC. Coleman, J. S. 1988. Social capital in the Creation of Human Capital: American Journal of Sociology, Vol. 94, Supplements95-s120. Dugan, jpg.1990. Wetland conservation: A Review of current issue and Action IUCN, Gland, Switzerland. Fabricus, C., Koch, E.Magome.H. And Turner, S. (Eds) 2004. Rights, Resources and Rural Development: community based natural resource management in South Africa. G. A Persoon, D.M.E.Vanest and P.E. Sajise. Copenhagen: Nordic Institute of Asian Studies. Green, S.B. 1991. How many subjects does it take to do a regression analysis? Multiva Behavioral Research, 26 (3): 499-510. Gujarati, N. Damodar. 2004. Basic Econometrics: The McGraw: Hill Companies 4th Edition: ISBN: 0072565705. HOBLEY, M. AND D. SHIELDS. 2000. The reality of trying to transform structures and processes: forestry in rural livelihoods. Overseas Development Institute, Working paper 132, London, UK. IUCN, 1996. Resolutions and recommendations, Montreal: World Conservation Congress (Canada), 13–23 October, 1996. Kepe, T.2008.LandclaimsShow MoreRelatedFarming and Natural Resource Dynamics under Public-Private Partnership in Eastern Zambia1583 Words   |  6 Pages1.1. Community-Based Natural Resource Management (CBNRM): Opening Doors for Market-Oriented Approaches Over the past twenty years, CBNRM has been adopted as a panacea for achieving sustainable NRM and rural economic development in East and Southern Africa [13]. CBNRM was born out of the wisdom that most causes of rural resource degradation take place due to centralised governance systems that exclude local communities from accessing resources in protected areas [14]. Thus, Nyirenda et al. [15]Read MoreIntroduction Knowledge has always been transferred from older generation to younger generations700 Words   |  3 Pageshave managed natural resources for millennia . Thus biodiversity conservation holds primary importance for sustainable use of the natural resources especially at a time which when the common resources which should be judiciously exploited are being exploited in arbitrary manner. The Role of Traditional Knowledge in Bidoversity Conservation The term traditional knowledge is very often substituted for the word Indigenous knowledge considering the fact that, it was the indigenous communities which wereRead MoreThe Nature Of The Environment1279 Words   |  6 Pagesof nature and should act accordingly in order to protect the environment. They also all believed that in order to grow popularity for conservation practices, education—environmental education—is key to growing popularity for the environment. Finally, these figures all recognized that the environment does change overtime. The environmental evolution is a slow, natural process. However, human presence hastened the evolution, and the earth cannot maintain such an accelerated inorganic evolutionary processRead MoreWorld Environment Day1626 Words   |  7 Pagesthe environment. This is an urgent appeal to each one of us to recognize the significance of â€Å"Elixir of Life† and the role each one of us can play to conserve it. India has rich tr aditional knowledge and wisdom in the conservation of nature and natural resources.    Religious beliefs, culture and folklore have together treated nature and environment with sanctity.    Conservation and protection of environment and love for nature have always been part and parcel of Indian ethos and culture. Thank youRead MoreLiterature Review: Nature-Based Tourism1619 Words   |  6 Pagesdepends on experiences openly connected to natural lures and this does involve things like ecotourism, extractive tourism, wildlife tourism adventure tourism, and nature retreats (Schumacher, 2007). From the position of conservation, nature-based tourism delivers inducements for local communities and landowners to protect wildlife environments that are upon which the industry becomes contingent it endorses conservation by engaging a better value on residual natural parts (Wood, 2007). As nature tourismRead MoreGlobalization And Culture1089 Words   |  5 Pagesthe â€Å"Stewardship of Natural Resources†. Globalisation plays a large role in the understandings between one group of people to another, but to further express the relation between Culture and the â€Å"Stewardship of Natural Resources†, it is also important to understand the relationship cultures have with the environment. Overarchingly, this wicked problem is best addressed on the global scale of culture by means of the global scale of things. â€Å"The stewardship of natural resources† addresses the way weRead MoreClimate Change And Its Effects On Our Society1545 Words   |  7 Pagespace than natural cycles typically allow. According to a 2016 Monmouth University Poll, most Americans acknowledge, at least to some extent, that â€Å"the world’s climate is undergoing a change that is causing more extreme weather patterns and the rise of sea levels.† Since humans rely so heavily on their environment to provide a plethora of goods and services, it is crucial to examine our role in climate change and the way that it impacts our society. While climate change affects communities around theRead MoreEnvironmental Conservation Of Tampa Bay1638 Words   |  7 Pages Environmental Conservation in Tampa Bay Natalie Marshall Everest University October 2, 2014 â€Æ' Environmental Conservation in Tampa Bay Give a hoot, don’t pollute! This slogan was popular in the 1970’s when a cute animated owl named Woodsy the Owl was introduced on television in a public service announcement by the U. S. Forestry service in an antilitter campaign. Don’t be a dirty bird was an additional slogan associated with this cute character to grab the attention of children as well asRead MoreTaking a Look at Gender Inequality625 Words   |  3 Pagesmanagers of natural resources. In rural areas, it is common that women are the managers of natural resources such as forest, water and land. Women live in rural area are often less educated, and do not have as stable job. Therefore, they are usually housewives. But these women are the main power of rural micro-economic activities. According to the lecture notes, Women play important role in such communities because their traditions and knowledge bring them in closer with these natural resources, and theyRead MoreThe Progressive Eraà ±s Conse rvation Movement and Congressman Morrie K. Udall598 Words   |  3 Pagespolicies- both on a policymaker and citizen scientist standpoint. As the public became more aware of environmental issues, concern about pollution, improper disposal, dwindling resources, radiation and poisoning enraptured a growing number of supporters. These supporters made it so that unlike the Progressive Era’s conservation movement (1890’s-1920’s), which was mainly elitists, this modern movement was pushed by â€Å"the common man.† It was an era that celebrated leaders such as John Muir, Henry David

Maryland Colleges and Universities Pursuing Online and Campus-based Education in Maryland 2019

With its sand dunes, marshes, mountains, and rolling hills, Maryland is often referred to as America in Miniature. Its extensive network of Maryland colleges and universities provides quality training for a high earning workforce. The Maryland economy is boosted by the major U.S. port in Baltimore, Maryland. Now more than ever before, college-bound working professionals have a wealth of opportunity in education and careers throughout the state of Maryland. Maryland University Graduates find Employment in a Diversified Labor Market Maryland is home to numerous government agencies and military facilities that provide employment for its largely white-collar workforce. Graduates of Maryland universities and colleges have a wide selection of career opportunities in important Maryland industries, such as: Maryland Tourism. Biotechnology Research in Maryland. Information Technology in Maryland. Maryland Printing Publishing. Maryland Finance. Maryland Real Estate. Maryland Insurance. Maryland Service . Federal Government in Maryland. Strong Local Economy Gives Maryland College Graduates the Highest Earnings in the Nation Maryland currently boasts the highest median household income in the entire U.S. Graduates of Maryland colleges and universities can count on a thriving local economy, as the Department of Labor and U.S. Census Bureau reports: The 2016 2017 Maryland median household income was $59, 762. The September, 2017 Maryland unemployment rate was 4%, well below the national average. 2,891,000 people are employed in Maryland. The 2017 Maryland gross state product was $228 billion. .udd4750ab5171e0afc404e2061e03a470 { padding:0px; margin: 0; padding-top:1em!important; padding-bottom:1em!important; width:100%; display: block; font-weight:bold; background-color:#eaeaea; border:0!important; border-left:4px solid #34495E!important; box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); -moz-box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); -o-box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); -webkit-box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); text-decoration:none; } .udd4750ab5171e0afc404e2061e03a470:active, .udd4750ab5171e0afc404e2061e03a470:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; text-decoration:none; } .udd4750ab5171e0afc404e2061e03a470 { transition: background-color 250ms; webkit-transition: background-color 250ms; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; } .udd4750ab5171e0afc404e2061e03a470 .ctaText { font-weight:bold; color:inherit; text-decoration:none; font-size: 16px; } .udd4750ab5171e0afc404e2061e03a470 .post Title { color:#000000; text-decoration: underline!important; font-size: 16px; } .udd4750ab5171e0afc404e2061e03a470:hover .postTitle { text-decoration: underline!important; } READ Earning a Criminal Justice Degree OnlineLarge Network of Maryland Colleges and Universities Offer Online and Campus-based Learning Opportunities With the flexible learning options offered by Maryland colleges and universities, working professionals and students with family responsibilities have a variety of options to fit their needs. Unique combinations of campus-based and online education programs are available through Maryland schools, such as: Kaplan University: Hagerstown Business College in Hagerstown and Frederick, TESST College of Technology in Baltimore, Beltsville, and Towson. University Of Phoenix: Columbia College Campus, Aberdeen University Campus, Timonium School Campus, Greenbelt College Campus, Rockville University Campus Online Programs ITT Technical Institute: Owings Mills College Campus and Online Programs. For more information on attending Maryland colleges and universities, students are encouraged to visit College-Pages.com, the leading education and career resource website. Prospective students will also find informative articles on making education and career decisions in the state of Maryland. .u9b9fa22b6aee676f06a0d4a7889e6b38 { padding:0px; margin: 0; padding-top:1em!important; padding-bottom:1em!important; width:100%; display: block; font-weight:bold; background-color:#eaeaea; border:0!important; border-left:4px solid #34495E!important; box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); -moz-box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); -o-box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); -webkit-box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); text-decoration:none; } .u9b9fa22b6aee676f06a0d4a7889e6b38:active, .u9b9fa22b6aee676f06a0d4a7889e6b38:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; text-decoration:none; } .u9b9fa22b6aee676f06a0d4a7889e6b38 { transition: background-color 250ms; webkit-transition: background-color 250ms; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; } .u9b9fa22b6aee676f06a0d4a7889e6b38 .ctaText { font-weight:bold; color:inherit; text-decoration:none; font-size: 16px; } .u9b9fa22b6aee676f06a0d4a7889e6b38 .post Title { color:#000000; text-decoration: underline!important; font-size: 16px; } .u9b9fa22b6aee676f06a0d4a7889e6b38:hover .postTitle { text-decoration: underline!important; } READ Persuing an Elementary Education Online DegreeRelated ArticlesCriminal Justice Degree College Online College Proves to be a Smart Choice for Maryland Working ProfessionalsHow to Find a Good Information Technology SchoolPursuing Online and Campus Based Education in Washington D.C.Online Degree Programs The Pros and Cons of Enrolling in Higher Education through Distance ProgramsPuerto Rico Colleges and Universities Pursuing Online and Campus Based Education in Puerto RicoBachelor Criminal Justice Degree Online Could St. Louis Use more Criminal Justice College Graduates

Community Colleges A Wide Variety Of Population With...

Summary Because community colleges are serving a wide variety of population with different needs, they have to make sure that each needs are fulfill and most important the mission is being carried out. â€Å"The students who attend to upgrade their skills for a particular job, students who are pursuing an associate degree to transfer to a 4-year institution, and students who attend to pursue a hobby (such as learning a language); the educational outcomes of community college students reflect this diversity† Students at Community Colleges. (n.d.). The purpose of the article was to inform the public about African American and Latina/o students who attend community colleges and the success and knowledge that they gain reflects on how well the overall experience at the community college have prepared them for the real world and their future. According to Scandoval-Lucero, Maes and Klingsmith (2014), â€Å"Community colleges have the potential to significantly impact the higher education outcomes for the students that they serve† (para. 5). The mission of the community colleges is to work with individuals from different background, academic skills and diverse educational backgrounds. Therefore, learning outcomes evaluation or assessment in community colleges brings wide range of opportunities and challenges typically to these colleges and the students that they represent. Community colleges have been providing open access to everyone who did not get accepted in a four yearShow MoreRelatedEssay on Choosing Between College and a Steady Job623 Words   |  3 Pageshave increasingly found themselves in a position where they have to choose between a college education and remaining at a steady job. However, with the growing demand for college-educated workers, a college education is highly recommended in order to att ain a job that is capable of providing the individual and his family a respectable income. Even as more people from low socio-economic status are applying to college, the difference in graduation rates between the top and bottom income groups is predictableRead MoreThe Relationship Between A Ball And A Harsh Place : A Study Of Black Male Community College Student Athletes And Academic1346 Words   |  6 PagesIn the article, Between a ball and a harsh place: A study of Black Male Community College Student-Athletes and Academic Progress, by Horton, Horton, Jr, research was conducted about how black male community college student athletes and the relationship between their ability to do well in school, compared to other non-student athletes. In this article, I will be discussing the different parts of the research process that is used throughout the reading. In the following, I will be discussing; theRead MoreA Community Is An Area Of Group Of People Who Has And Share Things1221 Word s   |  5 PagesA community is an area of group of people who has and share things in common. A community may be large or a small population. â€Å"According to Stanhope and Lancaster (2016) â€Å"A community is defined as a locality-based entity composed of systems of formal organizations reflecting societal institutions, informal groups, and aggregates that are interdependent and whose function or expressed intent is to meet a wide variety of collective needs† (p.230). The World Health Organization (2004) viewed a communityRead MoreLatino Students : The Latino Population1232 Words   |  5 Pages The Hispanic population is one of the fastest-growing minority populations in the United States. Despite their growing number and the great strides taken to narrow the academic gap, students learning English as a second language remain among the most educationally disadvantaged groups in the country. Madrid states that, â€Å"poor academic achievement of Latino students is in dicative of a complex, multifaceted problem that must be addressed because as the Latino student population continues to growRead MoreLewis Katz School Of Medicine Essay1308 Words   |  6 Pagesgraduates humanistic physicians and emphasizes the caring of human beings. I believe that patient interaction is as a vital part of being a physician as medical knowledge.At Lewis Katz, each student belongs to one of the seven Doctoring colleges. Through the Doctoring colleges, I will start learning and practicing critical clinical skills as early as my first year. Being with the same group over the next two years, I will not only learn to work with others but also form meaningful relationships with facultyRead MoreThe Effects Of Childhood Sexual Abuse Long Term948 Words   |  4 Pagesusing the college student population as the basis of a study to look at the effects of childhood sexual abuse long term. I feel very strongly that I need to elaborate on that, and problems it likely present s. According to Rind, Tromovitch, and Bauserman (1998), only 50% of American adults go to college. This cuts out half of the general American population right there. In addition, many of those who were sexually abused as kids may well never make it to college, for lots of different reasons,Read MoreA Letter Of Interest For The Clinical Therapist Position At The Ohio State University Counseling And Consultation Service782 Words   |  4 Pagesand interdisciplinary climate fostered in the agency. This, along with the opportunity to serve marginalized populations, and tailor group and outreach activities to the needs of students and the larger university community, makes CCS the ideal place to begin my professional career. I believe that the rigorous didactic and clinical training I have gained working specifically within college counseling centers over the last four and a half years has prepared me well to serve at a dynamic, fast-pacedRead MoreCommunity College Education Should Not Be Tuition Free998 Words   |  4 PagesCommunity College Education Should Not Be Tuition Free Every year, millions of students graduate from high school and consider studying in community college. The main reason for them to choose community colleges over four-year universities is the affordable tuition, or they have undecided majors for their careers. Unfortunately, an academic article published in 2014 â€Å"How to Help College Students Graduate,† Kirp demonstrated, â€Å"American students are enrolling college in record numbers, but they areRead MoreAnalysis Of Audre Lordes Sister Outsider, By Audre Lorde1544 Words   |  7 PagesWhen I was a senior in High School I completed a final project that prompted me to choose a literary work written by an individual with different life experiences than my own. I wrote a research paper explaining the author’s background and compared how the author’s environment influenced their interpretation of the world versus my own. I went into the project believing it to be another time-waster activity that would finall y secure my high grade in the course. Unknown to me, this project would catapultRead MoreInternational Economics And The Field Of International Development716 Words   |  3 PagesI would like to mention some courses that I have taken at Knox College that not only have encouraged me to take up the particular field of study as a major, but have also fortified me to volunteer and intern in the field of international development. These courses are: International Economics (Manisha Pradhananga, Professor), Business Society (John Spittell, Professor) Environmental Natural Resource Economics (Steve Cohn, Professor) and Environmental Ethics (Bill Young, Professor). These particular

Industrial Education Free Essays

Anything made of metal, no matter how big or small, can be welded. Examples are everywhere, from vehicles like cars, trucks and motorcycles to rail cars, ships, aircraft, rockets and space stations. Construction is a huge market, and skyscrapers, bridges and highways would be impossible to build without welding, as would oil and natural-gas pipelines, offshore oil platforms, giant wind turbines and solar panels. We will write a custom essay sample on Industrial Education or any similar topic only for you Order Now Welders help install and maintain boilers, antipollution systems and other large structures, as well as piping for industrial, commercial and residential facilities. Welding is even used by artists to create sculptures and decorative items. There is almost no limit to what welding can do, especially since developments in the technology continually improve its accuracy, quality and versatility. Welding is, in fact, an increasingly high-tech skill. Welders are being trained to operate robots and other automated systems that use powerful lasers, electron beams and sometimes explosives to bond metals. The ability to work with computers and program software is consequently vital to the successful operation of these systems. Don Howard, a welding specialist at Concurrent Technologies Corp., an engineering firm in Johns town, Pa., estimates that 20%-25% of U.S. welding is automated and predicts this trend will grow by about 20% in the next few years. â€Å"A lot of very intelligent people are coming into the welding community,† says Howard. There is money to be made, he notes, but the industry also offers career paths. â€Å"Welding is not just about working on a manufacturing line anymore. Once in the industry, people know they can find a niche.† â€Å"These are good times to be in welding,† says Patricio Mendez, director of the Canadian Center for Welding and Joining at the University of Edmonton in Alberta, Canada. Mendez notes that students who like designing and building with metal and are interested in fields such as materials engineering, robotics, lasers, computer programming and systems integration will find plenty of career opportunities in welding. Many students are introduced to the process by virtual welding. This simulation program is being developed by the Edison Welding Institute of Columbus, Ohio, to teach the basics of welding in classrooms. â€Å"The objective is to give students a virtual experience that is very much like the real thing,† says John Coffey, engineering manager at. The system uses sensors that duplicate the look and feel of welding. There are more than 80 welding processes. Most involve a skilled worker using a high-heat torch (2,800-plus degrees Fahrenheit), filler material that is usually in wire or stick form (though some welds don’t use fillers) and pressure to permanently bond metal pieces. Welding can also be used to cut and dismantle objects of all sizes as well as for repairs. The most common process is Gas Metal Arc Welding, or GMAW. In GMAW, an electrode, which is also the filler, is continuously fed through the nozzle of an arc torch. When the welder activates the torch, several operations take place: The electrode begins feeding through the nozzle, a direct current is generated that creates an arc when it comes in contact with the electrode and shielding gases are released around the nozzle to protect the weld from atmospheric gases that could degrade its quality. The arc, whose movement the welder controls, consumes the electrode, fills in the weld joint and creates the weld. Other widely used techniques like Gas Tungsten Arc Welding (GTAW) and Shielded Metal Arc Welding are variations of the process. GTAW, for example, is a relatively low-heat method that uses a non-consumable tungsten electrode. Its low-heat characteristic reduces distortion in thin metals, such as those used in aerospace, also called â€Å"stick welding,† uses a flux-coated consumable electrode (â€Å"flux† is a chemical cleaning agent that removes oxidation from the metals to be joined) and is primarily used for repair and steel welding. As the electrode burns, the flux disintegrates, which releases a shielding gas that protects the weld from degradation. In more advanced welding technologies, lasers are combined with in a hybrid process to make what one expert calls â€Å"scalpel-like cuts† that are up to  ½-inch deep, narrow and extremely precise. The part of the process then deposits the filler and melts it with a secondary heat source. The influence of welding is so broad that many of the product designs and building techniques people take for granted would not be possible without it. With demand for skilled welders rising and the technology of welding becoming more advanced, especially where automation is concerned, students have a unique opportunity to learn a career that can be shaped around their interests. How to cite Industrial Education, Essay examples

Innovation And Entrepreneurship Affect †MyAssignmenthelp.com

Question: Discuss about the Innovation And Entrepreneurship Affect. Answer: The essay presents a brief overview of the innovation and entrepreneurship. It explains that how innovation and entrepreneurship affect the business activities of the organization. Innovation is the application and process of better solutions in order to meet implicit needs, new requirements and market needs and desires. The innovation is related to the new invention. Innovation and entrepreneurship are interconnected with each other. Further, innovation is the process of implementation of new ideas, thoughts, technology, and knowledge. Innovation is the result of collective and group efforts where success and growth depend upon the new technology and science. Innovation and entrepreneurship are the broader concepts. Innovation is the process of converting an idea and invention into the good and service which create effective values in the organization (Bloom, Draca Van Reenen, 2016). It involves the planned application of knowledge and information, initiative, imagination and diffe rent values from resources. It is a process which involves many activities, performed by the various players in the organization. Many organizations adopt innovation and entrepreneurship process to gain the more success and growth in the future. Innovation is not only the invention process but it also makes changes in the business model of the organization. Innovation increases the customer choices and expectations and it also maximizes the globalization connectivity. Through innovation, the company can take the entrepreneurship benefits. Therefore, innovation plays a significant role in every organization. It is the combination of entrepreneurial process and inventive process to create and build new economic value for the various stakeholders (Hattab, 2014). Entrepreneurship is the process launching, running, operating and designing a new business and trade. It has been defined as the Willingness and capability to organize, manage, operate and develop a business with reducing the various kind of risk in order to increase the revenue and profit of the company. The entrepreneurs identify the opportunities and threats of the market. An entrepreneur defined as a person who starts, manages, organizes and operates any venture and enterprise. Entrepreneurship creates and develops the opportunities for the employment and it enhances and increases the economy of the country (Choi Majumdar, 2014). It is mandatory for the enhancement and development of managerial and administrative capabilities. It is the broad and dynamic concept which eliminates and removes the various barriers and obstacles within the organization. In entrepreneurship, people develop new ideas and thoughts and they become more aware and measure and identify the opportunities an d threats of the company. After the various researches, it has been found that innovation and entrepreneurship are very important to expand the business activities and to overcome on the market competitors (Bae, Qian, Miao Fiet, 2014). Innovation and entrepreneurship play a significant role in every organization. Innovation is the specific instrument of entrepreneurship. Entrepreneurs search and find the sources of innovation and they find the opportunities for the business. Innovation is essential for the survival of entrepreneurs and it is also necessary to expand the business of the organization. Innovation and entrepreneurship are the key success factor of the organization. In todays competitive environment, innovation and entrepreneurship are important success factors to overcome on the competitors in the market. Innovation and entrepreneurship help to develop and build the organizational structure and values in the organization. Entrepreneurs are the person who identifies and evaluate the various opportunities and finds the gaps in the market and measures the feasibility of new business. They collect the feedback from the market to achieve the organizational goals and objectives. Many companies use the tradit ional business techniques and methods in business which affects the business activities of the company. Therefore, the organization uses innovation and entrepreneurship process in the organization. Entrepreneurs use the innovations to improve and enhance the quality of work and they also improve the position of the company in the global economy. Entrepreneurs are responsible for growth and success of the company (Kleinknecht, 2016). Here, my stuff movement hypothetical company has been selected for the essay. The essay provides an overview of the importance and effects of using the innovation and entrepreneurship tool in themanagement so that objective can be achieved. My stuff movement is a mover and packer company which is a transporting business. The company assists the customers in delivering services at their doorsteps. Through these activities, the product is easily reachable by the customers. Many other activities which the company performs are online delivery, assisting in shifting house, assist in home deliveries etc. As the business is new in the market and the idea of the business is also creative, thus the company needs to use innovation and entrepreneurial activities in their business in order to achieve success (Seltzer Mahmoudi, 2013). The fact is known to all that no business in todays world can run easily without using innovation tool in their business. In order to create a different position in the industry, each and every company needs to implement such techniques. Further, the concept of the business is creative so if the entrepreneur of the company will implement the innovative techniques then the business will gain the market share in a short span of time. The company shall use disruptive innovation technique in their business so that their capabilities are enhanced in the market. Disruptive innovation is the type of innovation which the business process use utilizes to improve the quality of their product and provide maximum satisfaction to the customer of the company. My stuff movement company has originated with an innovative idea in the market, thus the customers will now expect from the company that it will work accordingly with innovative techniques in the market (Baden-Fuller Haefliger, 2013). Disruptive innovation will help the company to circulate their product in the target market with low prices. This will attract the interest of the customers which will make them use the services of the company. And ultimately the sale of the company will rise. If the products are distributed in the market without lower prices and there are easily available to the customers at their doorstep then, due to better availability at low prices the company will flourish in the market and gain the competitive edge. If such transport services are being sold at a high price in the market, then it will become difficult for the business to create its position in the market due to already existing competitors in the market (Leutner, Ahmetoglu, Akhtar Chamorro-Premuzic, 2014). Talking about the use of entrepreneurial techniques in the company, such techniques will assist the company in the initiation of disruptive innovation in the market. Innovation and entrepreneurship tools are always used in alignment, innovative being the wider concept is used by the entrepreneur in initiating their business functions (Frankenberger, Weiblen, Csik Gassmann, 2013). An entrepreneur is a person who analyses the risks which can create losses for the company and drive them to generate profits for the organization. No entrepreneur can work efficiently without using innovative techniques. In the company my stuff movement, the main task which the entrepreneur shall perform is to motivate the employees and make them understand the tools which the company is going to use to increase the sale in the market. If the employee of the company will not support the decision of their leader then the company cannot work in long run. Thus, along with innovation, the manager of the compan y shall efficiently work on the entrepreneurial techniques so that maximum financial benefits are attained for the company (Kttim, Kallaste, Venesaar Kiis, 2014). One of the innovative techniques which the company shall be utilized to maximize their profits is the use of social media technology to enhance the working of the business. Talking about innovation, technology is the foremost import thing which attracts the business and helps them to earn benefits. The entrepreneur shall efficiently analyze the demand of the target market and the requirement of the customers, and then accordingly supply the services and product in the market. Further, it shall be noted that the entrepreneur shall help the personnel of the company to develop the capabilities and skills (Cabigiosu, Zirpoli Camuffo, 2013). The impact of the use of innovative entrepreneurial techniques is that the company will enhance its skills and create a product which is demanded in the market. Innovation is not only required by the product or services but the entrepreneur can initiate innovation in the internalmanagement of the organization as well. With this effect, the entreprene ur will initiate themanagement to utilize the resources optimally and reduce wastage. Another way in whichinternal management can be enhanced is that the leader shall educate the management regarding the innovative techniques used in the business so that they can trust on the activities of their manager. So, in this way the innovation and entrepreneurship tools can help the company to utilize the resources optimally and gaining maximum benefit for the company (Boons, Montalvo, Quist Wagner, 2013). Hence, from the above events, it shall be noted that in todays world it very essential for a company to implement innovation and entrepreneurship techniques in their business process. So the My Stuff Company shall also make sure that the entrepreneur uses the innovative techniques and gain benefits for the company. Also, the company shall use innovative technology to enhance the skills of the business. References Baden-Fuller, C., Haefliger, S. (2013). Business models and technological innovation.Long range planning,46(6), 419-426. Bae, T. J., Qian, S., Miao, C., Fiet, J. O. (2014). The relationship between entrepreneurship education and entrepreneurial intentions: A meta?analytic review.Entrepreneurship theory and practice,38(2), 217-254. Bloom, N., Draca, M., Van Reenen, J. (2016). Trade induced technical change? The impact of Chinese imports on innovation, IT and productivity.The Review of Economic Studies,83(1), 87-117. Boons, F., Montalvo, C., Quist, J., Wagner, M. (2013). Sustainable innovation, business models and economic performance: an overview.Journal of Cleaner Production,45, 1-8. Cabigiosu, A., Zirpoli, F., Camuffo, A. (2013). Modularity, interfaces definition and the integration of external sources of innovation in the automotive industry.Research Policy,42(3), 662-675. Choi, N., Majumdar, S. (2014). Social entrepreneurship as an essentially contested concept: Opening a new avenue for systematic future research.Journal of Business Venturing,29(3), 363-376. Frankenberger, K., Weiblen, T., Csik, M., Gassmann, O. (2013). The 4I-framework of business model innovation: A structured view on process phases and challenges.International Journal of Product Development,18(3-4), 249-273. Hattab, H. W. (2014). Impact of entrepreneurship education on entrepreneurial intentions of university students in Egypt.The Journal of Entrepreneurship,23(1), 1-18. Kleinknecht, A. (2016).Innovation patterns in crisis and prosperity: Schumpeters long cycle reconsidered. Springer. Kttim, M., Kallaste, M., Venesaar, U., Kiis, A. (2014). Entrepreneurship education at university level and students entrepreneurial intentions.Procedia-Social and Behavioral Sciences,110, 658-668. Leutner, F., Ahmetoglu, G., Akhtar, R., Chamorro-Premuzic, T. (2014). The relationship between the entrepreneurial personality and the Big Five personality traits.Personality and individual differences,63, 58-63. Seltzer, E., Mahmoudi, D. (2013). Citizen participation, open innovation, and crowdsourcing: Challenges and opportunities for planning.CPL bibliography,28(1), 3-18.